This EV charger adapter has a nice appearance, a hand-held ergonomic design, and is easy to plug. The adapter’s length is 16 cm and is made from thermoplastic material. It is small, perfect for traveling, and easy to store.
We recommend using the following steps:
1、Ensure that your EV is equipped with a Type 1 charging port and that the charging station or cable has a Type 2 plug.
2、Connect the Type 2 plug of the charging station or cable to the Type 2 socket of the adapter.
3、Connect the Type 1 plug of the adapter to your EV's charging port.
4、Power on the charging station, and your EV should start charging.
1. Material: gun head/holder: PA66+25GF, black environmental protection material, flame retardant grade: 94-VO; upper and lower covers: PC+ABS, flame retardant grade: UL 94-VO
2. Terminal: positive and negative terminal: H62 brass silver-plated 3um: signal terminal: H62 brass silver-plated 3um;
1. Rated current: 48A
2. Temperature rise test: 48A current for 4H, temperature rise ≤ 50K (wiring 8AWG or more)
3. Insulation resistance: ≥100MQ, 500V DC
1. Retention force: the pull-off force of the main line terminal and the cable after riveting; ≥450N
2. Plug life: ≥10000 times
3. Withstanding voltage: mainline L/N PE: 8AWG 2500V AC
4. Insulation resistance: ≥100MQ, 500V DC
5. Insertion force: ≤100N
6. Working temperature: -30℃~50℃
7. Protection level: IP65
8. Salt spray resistance: 96H no corrosion, no rust
|Your Reliable Friend|
Our factory has a scientific research and manufacture base of more than 20,000 square meters, ten electric vehicle charging equipment production lines, and as many as 300 production personnel.
Fully automatic PCB SMT ensures stable and reliable production of all hardware boards.
Strictly controls the quality of incoming materials and adopt redundant stocking mecha- nism to ensure the smooth delivery of products.
With an intelligent production workshop, complete experiments and test instruments, the output quality is strictly controlled.